Read more
Force Sensing Resistor (FSR)
FRX1T
The FRX1T is a miniature single-zone force-sensitive resistor (FSR) with a 5mm diameter sensing area and a 13mm x 7mm form factor. Its compact design supports single-point force detection, offering flexibility for integration in space-constrained environments and a wide range of pressure-sensing applications.
- Sensor Type: Thru mode
- Active Area: Ø5 mm
- Actuation Force: ≤ 50 g
- Nominal Thickness: 0.33 mm
- FSR Length: 15mm
Characteristics
- Force Sensing Range: 50g - 2kg
- Actuation force: ≤ 50g
- Force Resolution: Continuous (analog)
- Force Repeatability: ± 2% (single part)
- Non-actuated Resistance: > 10M Ω (Ohm)
- Response Time: < 40 ms
- Operation Temperature: -20ºC - +60ºC
Durability
- Tap Durability: > 10M actuation (1kg/1Hz)
- Stand Load Durability: < 5% (2.5kg/24hr)
- Operating Temperature Performance:
- Cold -40ºC/1hr: < 5%
- Hot +60ºC/1hr: <15%
- Storage Temperature Performance:
- Cold -40ºC/1hr: < 10%
- Hot +60ºC/1hr: <15%
Safety
- Maximum Driving Power: < 240mW
- Electromagnetic interference (EMI): No
- Electrostatic Discharge (ESD): No
Small point, Thru FSR
Latest Insights
Improve the stability and accuracy of FSR readings by adding a simple op-amp buffer to your voltage divider circuit.
Explore how inverting op-amps enhance FSR signal range, stability, and linearity for more accurate analog sensing.
A practical introduction to voltage dividers and how they convert sensor resistance changes into analog voltage signals for microcontroller input.
Collaboration Begins Here.