Read more
Matrix Array Sensor
PMX1S
The PMX1S is a shunt-mode pressure mapping sensor featuring a 16×16 matrix array with 256 sensing points and a resolution of 6.25mm × 6.25mm per point. It detects forces ranging from 200g to 10kg, providing reliable pressure distribution data. Its ultra-thin and flexible design allows for easy integration into various applications requiring detailed force sensing.
- Sensor Type: Shunt mode
- Active Area: 100mm x 100mm
- Sensing Cell: 256 (16 rows x 16 columns)
- Nominal Thickness: 0.56 mm
- FSR Length: 125mm
Characteristics
- Force Sensing Range: 200g - 10kg
- Actuation force: ≤ 200g
- Force Resolution: Continuous (analog)
- Force Repeatability: ± 2% (single part)
- Non-actuated Resistance: > 10M Ω (Ohm)
- Response Time: < 40 ms
- Operation Temperature: -20ºC - +60ºC
Durability
- Tap Durability: > 10M actuation (1kg/1Hz)
- Stand Load Durability: < 5% (2.5kg/24hr)
- Operating Temperature Performance:
- Cold -40ºC/1hr: < 5%
- Hot +60ºC/1hr: <15%
- Storage Temperature Performance:
- Cold -40ºC/1hr: < 10%
- Hot +60ºC/1hr: <15%
Safety
- Maximum Driving Power: < 240mW
- Electromagnetic interference (EMI): No
- Electrostatic Discharge (ESD): No
256 Zones, 16x16 Array
Latest Insights
Improve the stability and accuracy of FSR readings by adding a simple op-amp buffer to your voltage divider circuit.
Explore how inverting op-amps enhance FSR signal range, stability, and linearity for more accurate analog sensing.
A practical introduction to voltage dividers and how they convert sensor resistance changes into analog voltage signals for microcontroller input.
Collaboration Begins Here.