Read more
Discrete Array Sensor
TRX1S
The TRX1S is a 4x4 discrete array force-sensitive resistor (FSR) featuring 16 individual sensing zones, each measuring 15mm x 15mm. Operating in shunt mode, it detects forces ranging from 200g to 10kg. Its ultra-thin, flexible design allows for seamless integration into various applications.
- Sensor Type: Shunt mode
- Active Area: 15mm x 15mm x 16pt
- Actuation Force: ≤ 100 g
- Nominal Thickness: 0.35 mm
Characteristics
- Force Sensing Range: 200g - 10kg
- Actuation force: ≤ 200g
- Force Resolution: Continuous (analog)
- Force Repeatability: ± 10% (single part)
- Non-actuated Resistance: > 10M Ω (Ohm)
- Response Time: < 40 ms
- Operation Temperature: -20ºC - +60ºC
Durability
- Tap Durability: > 10M actuation (1kg/1Hz)
- Stand Load Durability: < 5% (2.5kg/24hr)
- Operating Temperature Performance:
- Cold -40ºC/1hr: < 5%
- Hot +60ºC/1hr: <15%
- Storage Temperature Performance:
- Cold -40ºC/1hr: < 10%
- Hot +60ºC/1hr: <15%
Safety
- Maximum Driving Power: < 240mW
- Electromagnetic interference (EMI): No
- Electrostatic Discharge (ESD): No
16 Zones, 4x4 Array
Latest Insights
Improve the stability and accuracy of FSR readings by adding a simple op-amp buffer to your voltage divider circuit.
Explore how inverting op-amps enhance FSR signal range, stability, and linearity for more accurate analog sensing.
A practical introduction to voltage dividers and how they convert sensor resistance changes into analog voltage signals for microcontroller input.
Collaboration Begins Here.